| Kurt Steffensen's Gorilla Amp(s)
|
|
|
|
Mark II |
|
Paul Joppa Parafeed Variation
|
|
> | (+400V > | > ) > ) > ) OPT > ) > ) > A >|-------------------------------- G 2A3 >| C >| ________________ | >| | 105v | +CCS | 145V >| ) | | >| ) choke | | >| ) low R | | >| ) | | >| ) | | >| | | | >|____| ca 100V | |________ > | | | | > A A 2500 ohms | >in---G driver C OC3 | | > C____________| | === bypass cap > | | | > bias resistor |________| > | | > ground ground |
And another variation |
+250V | |___ __________ 16 Ohm )|( )|(__________ 8 Ohm )|( )|(__________ 4 Ohm )|( | ____)|(____ 0 | | | | | | | | | | A | | --------G 2A3 | | | C | | | | | | | | | | | |_________________|__ + positive rail from | - 200V PSU. | | | ___________|_________ ground ( 250V PSU | | grounded here) | | | )| | )| | )| | )| | )| |________| | A ~---||----------G in 820n | C 100k | | | | LED (or batterie/resistor/bypassed |____| resistor , what everyou like best ) | - 200V ( Positive rail connected to point * , at the cathode of 2A3 ) |
one more |
|
|
|